Application Areas：Various mechanical equipment
Type：
iKIT wireless extrasensory cube series
High-frequency and stable monitoring of temperature, acceleration, isotropic strain
iKIT-Cube-Hexa-Acc-4F-T, simultaneously monitors the temperature, triaxial vibration information, and deformation evolution behavior of any location or toolholder (turning tool, boring tool, etc.). The internal sensor is activated by pressing a button on the product. Once powered on, the indicator light on the node will turn green, and the corresponding product serial number is recognized in the software interface connected to the receiving device. Users can set specific configuration information in software to complete effective data recording. Simultaneously, users can perform real-time analysis, data recording and statistics, and data export of the collected data.
Product Route：
Product Drawings:
Technical Parameters：
| Content | Note |
|---|---|
| Protection rating | IP65 |
| Weight | iKIT-Cube-E-9V：0.56 kg （Optional） |
| iKIT-Cube-Hexa-Acc-4F-T：0.38 kg | |
| Battery life | 1.5 h |
| Charging method | Wireless charging |
| Power supply via three-core cable | |
| Optional iKIT-Cube-E-9V power supply | |
| Signal acquisition | Temperature, force, torque, two-way bending moments and acceleration |
| Frequency | Temperature 0~128 Hz |
| Acceleration and stress 2 kHz | |
| Sampling Mode | Continuous, event-triggered |
| Description | Temperature: -265~1820 ℃, Supporting B, E, J, K, N, R, etc types |
| Acceleration(X,Y,Z): Configurable ranges of ±2, ±4, or ±8 g | |
| Force: F(2 kN)；M(30 Nm)；Bx&By(100 Nm) | |
| Crosstalk | < 5% FSO |
| S/N | 9-20 |
| Linearity | < 2% |
| Hysteresis | < 1% |
| Error | < 5% |
| Operating temperature | -40~85 ℃ |
| Mechanical Impact Limit | (Acceleration1000 g)/1.5 ms |
| Response time | < 5 ms |
| Transmission distance | 400 m(Indoor unobstructed) |
Product Application Areas：
- Monitor multiple signals during machining processes through synchronized data display;
- Test temperature, strain, acceleration, and other parameters at any position during machining;
- Determine machining status and predict anomalies by analyzing vibration conditions via real-time FFT windows;
- Applicable to any machine tool type and position, effectively reducing production downtime and defect rates caused by tool failures while optimizing production workflows;
- Integrates with our proprietary iKIT wireless extrasensory shank series to monitor deformation behavior of turning shanks during machining, specifically measuring force, torque, and two-way bending moments.
Telephone
0756-8821515
Mon~Fri, 9 AM~6 PM
idq_ltd@idq.org.mo
Reply within 24 hours
Company Address
Building 7, 1889 East Ring Island Rd, Hengqin, Zhuhai
Business Hours
Mon~Fri, 9 AM~6 PM
Fixed holiday rest